原著論文・著書
2025
2) In-situ methanation of adsorbed CO over Ni/CeO2 catalyst using H2 release from vanadium powder as H2-storage material, K. Oshima, J. Okuda, and M. Kishida, Int. J. Hydrog. Energy., 157, 150469 (2025).
1) Ni Leaching from NiS by Cu Oxidant with Metal Pieces in Acid Solution, K. Oshima, Y. Takaira, H. Kawada, T. Yamamoto, S. Heguri, and M. Kishida, J. Jpn. Inst. Metal. Mater., 89(4), 169-173 (2025).
2024
6) Catalytic Aromatization of Rapid Pyrolysis Gas of Low-density Polyethylene Using a Tandem Reactor, K. Oshima, M. Sakamoto, K. Tashiro, M. Kishida, S. Satokawa, Journal of the Japan Petroleum Institute, 67(6), 238-243 (2024).
5) Synthesis of Silver Nanowires using N,N-Dimethylalkylamine, H. Matsune, Y. Ueno, T. Wakamatsu, M. Fujimoto, K. Shiomori, T. Yamamoto, M. Kishida, Kagaku kogakuron bunshu, 50(1), 27-34 (2024).
4) Kinetics Analysis of Methylcyclohexane Dehydrogenation over Se-modified Pt/TiO2 Catalysts, K. Oshima, H. Ito, T. Yamamoto, and M. Kishida, J. Chem. Eng. Jpn., 57(1), 2301533 (2024).
3) Influence of sulfur contamination on ethylene aromatization over a Ga-modified MFI-type zeolite, K. Oshima, E. Konishi, R. Watanabe, C. Fukuhara, and M. Kishida, Chem. Eng. J., 480, 148241 (2024).
2) Effect of Strontium Addition to Ni/Al2O3 Catalyst for Phenol Steam Reforming in Dilute Conditions, K. Oshima, A. Yanagita, K. Tashiro, S. Satokawa, and M. Kishida, J. Jpn, Petrol. Inst., 67(1), 30-35 (2024).
1) Electric-field-assisted catalytic methanethiol decomposition using Pt/CeO2 catalyst, K. Oshima, R. Watanabe, C. Fukuhara, and M. Kishida, Catal. Lett., 154, 1398-1403 (2024).
2023
10) Wrapping of Drug Assembly with Silica Layer and Confinement through Reversible Linkage with Copper(II) for Glutathione-responsive Nanocapsule, H. Matsune, R. Yoshida, R. Ikemizu, K. Shiomori, T. Yamamoto, and M. Kishida, Chem. Lett., 52(12), 870-873 (2023).
9) Development and combustion characteristics of microwave plasma-assisted fluidized bed combustor, T. Yamamoto, Y. Imamura, and M. Kishida, Adv. Powder Technol., 34(10), 104203 (2023).
8) Colloidal Trehalose Nanoparticles for Sacrifice Template of Hollow Silica Nanosphere, H. Matsune, R. Ikemizu, K. Shiomori, E. Muraoka, T. Yamamoto, and M. Kishida, Bull. Chem. Soc. Jpn., 96(8), 813-815 (2023).
7) Effect of Ga substitution with Al in ZSM-5 zeolite in methanethiol-to-hydrocarbon conversion, R. Watanabe, N. Oba, I. Kakuno, K. Oshima, M. Kishida, K. Miyake, N. Nishiyama, P. Verma, and C. Fukuhara, RSC Adv., 13(31), 21441-21447 (2023).
6) Ethylene production via thermal coupling of methanethiol, R. Watanabe, N. Oba, I. Kakuno, S. Smith, K. Oshima, M. Kishida, P. Verma, and C. Fukuhara, Chem. Lett., 52(8), 661-664 (2023).
5) Kinetic Analysis on As(III) Oxidation in a Fixed-Bed Flow Reactor Filled with a Supported Platinum Catalyst, H. Kondo, K. Oshima, T. Yamamoto, and M. Kishida, J. Chem. Eng. Jpn., 56(1), 2212703 (2023).
4) Synthesis of 2,5-dimethylhexene by isobutene dimerization with H2S co-feeding, R. Watanabe, R. Tanikawa, A. Kurosaki, K. Oshima, M. Kishida, P. Verma, and C. Fukuhara, RSC Adv., 13(21), 14097-14101 (2023).
3) Effect of cobalt modification onto a Beta zeolite for the direct catalytic decomposition of dimethyl sulfide, K. Oshima, R. Kadonaga, T. Sugiyama, M. Kishida, and S. Satokawa, Int. J. Hydrogen Energy, 48(73), 28367-28376 (2023).
2) Highly stable Fe/CeO2 catalyst for the reverse water gas shift reaction in the presence of H2S, R. Watanabe, F. Karasawa, C. Yokoyama, K. Oshima, M. Kishida, M. Hori, Y. Ono, S. Satokawa, P. Verma, and C. Fukuhara, RSC Adv., 13(17), 11525-11529 (2023).
1) Voids formation characteristics in typical epoxy-based CFRP laminates during low-temperature annealing in the air or N2 atmosphere, K. Oshima, S. Matsuda, M. Hosaka, M. Kishida and S. Satokawa, Adv. Compos. Mater., 32(4), 519-531 (2023).
2022
8) Improved catalytic stability of Pt/TiO2 catalysts for methylcyclohexane dehydrogenation via selenium addition, H. Ito, K. Oshima, T. Yamamoto, K.W. Ting, T. Toyao, T. Sugiyama, Y. Kato, K. Morita, A. Ohashi and M. Kishida, Int. J. Hydrogen Energy, 47, 28635-28643 (2022).
7) A Study of Sustained Heat Generation from Pd-Ni-Zr Alloys in Hydrogen from the Viewpoint of Hydrogen Absorption, Y. Sato, M. Uchimura, K. Oshima, T. Yamamoto and M. Kishida, J. Condens. Matter. Nuclear Sci., in press.
6) Reductive removal of selenate (VI) in aqueous solution using rhodium metal particles supported on TiO2, K. Oshima, K. Ito, E. Konishi, T. Yamamoto, J. Fukai, T. Kajiwara and M. Kishida, RCS Adv., 12, 17655-17660 (2022).
5) Preparation of Hollow-Form LaNiO3 Perovskite Catalyst for PM Combustion Using Damaged Carbon Fiber, K. Oshima, M. Sakamoto, K. Morita, K. Kon, K. Shimizu, T. Yamamoto, M. Kishida and S. Satokawa, J. Chem. Eng. Jpn., 57(7), 243-247 (2022).
4) Treatment of pyridine in industrial liquid waste by atmospheric DC water plasma, C. Duan, M. Tanaka, M. Kishida, T. Watanabe, J. Hazardous Meter., 430, 128381 (2022).
3) As(III) removal through catalytic oxidation and Fe(III) precipitation, K. Oshima, H. Kondo, E. Konishi, T. Yamamoto, Y. Tsuge, T. Watanabe, and M. Kishida, RSC Adv., 12, 16843-16846 (2022).
2) CFD-IBM-DEM simulation for elucidation of PM filtration mechanisms in fluidized bed filter, K. Yokoo, M. Kishida and T. Yamamoto, Powder Technol., 402, 117336 (2022).
1) Increase in processing flue gas flow rate while maintaining the fluidization state and filtration performance in a low-temperature continuous regeneration filter using a fluidized bed, K. Yakoo, T. Yamazaki, M. Kishida, and T. Yamamoto, Adv. Powder Technol., 33, 103508 (2022).
2021
3) Influence of nozzle shape on partial oxidation reforming of biogas using microwave plasma, T. Yamamoto, S. Uchiyama, M. Kishida and R. Tanaka, Energy Fuels, 35, 4203-4211 (2021).
2) Experimental and numerical investigation of catalytic PM combustion in a fluidized bed type PM removal device for low-temperature continuous regeneration, K. Yokoo, A. Wakizaka, M. Kishida and T. Yamamoto, Adv. Powder Technol., 32., 151-165 (2021).
1) Numerical investigation of PM filtration in fluidized-bed-type PM removal device based on force balance via CFD-DEM simulation, K. Yokoo, M. Kishida and T. Yamamoto, Powder Technol., 380, 506-517 (2021).
2020
4) Parallelization of DEM simulation on distributed-memory computer via three-dimensional slice grid method, K. Yokoo, M. Kishida and T. Yamamoto, Mech. Eng. J., 6, 20-00444 (2020).
3) Application of microwave plasma to biogas reformulation, T. Yamamoto, S. Uchiyama, M. Kishida and R. Tanaka, Kagaku Kogaku Ronbunshu, 46., 123-128 (2020).
2) Kinetic modeling of PM combustion with relative velocity at low-temperature and numerical simulation of continuous regenerating type PM removal device that uses a fluidized bed, K. Yokoo, H. Matsune, M. Kishida, J. Tatebayashi and T. Yamamoto, Adv. Powder Technol., 31, 718-729 (2020).
1) PM combustion enhancement to reduce continuous regeneration temperature of fluidized bed type PM removal device using catalyst-doped bed particle, K. Yokoo, A. Kusu, M. Kishida, J. Tatebayashi and T. Yamamoto, Chem. Eng. J., 388., 124247 (2020).
2019
2) Glutathione-responsive nanoparticle consisting of an amino-functionalized silsesquioxane network cross-linked by zinc ions for a promising drug carrier, H, Matsune, T. Ono, R. Yoshida, T. Yamamoto and M. Kishida, Chem. Lett., 48(9), 1058-1061 (2019).
1) Promoting effect of water vapor on particle matter combustion in a low-temperature continuous regeneration type PM removal device using a fluidized bed, K. Yokoo, H. Matsune, M. Kishida, J. Tatebayashi and T. Yamamoto, Powder Technol., 355., 657-666 (2019).
2018
3) Excess heat evolution from nanocomposite samples under exposure to hydrogen isotope gases, A. Kitamura, A. Takahashi, K. Takahashi, R. Seto, T. Hatano, Y. Iwamura, T. Itoh, J. Kasagi, M. Nakamura, M. Uchimura, H. Takahashi, S. Sumitomo, T. Hioki, T. Motohiro, Y. Furuyama, M. Kishida and H. Matsune, Int. J. Hydrogen Energy, 43, 16187-16200 (2018).
2) Highly Active Low Cobalt Content-Based Bulk MoS2 Hydrodesulfurization Catalysts with a Unique Impact of H2S, H. Farag, A.A. Embaby, M. Kishida, A.N.A. El-Hendawy and M.M. Nasef, J. Chem., 8076534 (2018).
1) Improvement in the durability of carbon black-supported Pt cathode catalysts by silica-coating for use in PEFCs, S. Takenaka, M. Goto, Y. Masuda, S. Emura and M. Kishida, Int. J. Hydrogen Energy, 43., 7473-7482 (2018).
2017
5) Carbon-supported Pd-Ag catalysts with silica-coating layers as active and durable cathode catalysts for polymer electrolyte fuel cells, K. Park, H. Matsune, M. Kishida and S. Takenaka, Int. J. Hydrogen Energy, 42, 18951-18958 (2017).
4) Collaborative examination on anomalous heat effect using nickel-based binary nanocomposites supported by zirconia, A. Kitamura, A. Takahashi, K. Takahashi, R. Seto, Y. Matsuda, Y. Iwamura, T. Itoh, J. Kasagi, M. Nakamura, M. Uchimura, H. Takahashi, T. Hioki, T. Motohiro, Y. Furuyama and M. Kishida, J. Condens. Matter Nucl. Sci., 24., 202-213 (2017).
3) Modification of catalytic performance of supported Pt catalysts by coverage with silica layers, S. Takenaka, R. Akiyama, I.T. Kim, H. Matsune and M. Kishida, Chem. Lett., 46., 851-854 (2017).
2) Rapid and efficient catalytic oxidation of As(III) with oxygen over a Pt catalyst at increased temperature, J. Zhao, H. Matsune, S. Takenaka and M. Kishida, Chem. Eng. J., 325., 270-278 (2017).
1) Reduction of selenate with hydrazine monohydrate over Pt catalysts in aqueous solution, J. Zhao, H. Matsune, S. Takenaka and M. Kishida, Chem. Eng. J., 308., 963-973 (2017).
2015
5) Highly active and durable silica-coated Pt cathode catalysts for polymer electrolyte fuel cells: Control of micropore structures in silica layers, S. Takenaka, T. Miyazaki, H. Matsune and M. Kishida, Catal. Sci. Technol., 5, 1133-1142 (2015).
4) Modification of carbon nanotube surfaces with precious metal and transition metal oxide nanoparticles using thin silica layers, S. Takenaka, D. Mikami, E. Tanabe, H. Matsune and M. Kishida, Appl. Catal. A: Gen., 492., 60-67 (2015).
3) Performance and durability of carbon black-supported Pd catalyst covered with silica layers in membrane-electrode assemblies of proton exchange membrane fuel cells, K. Fujii, M. Ito, Y. Sato, S. Takenaka and M. Kishida, J. Power Sources, 279., 100-106 (2015).
2) Preparation of metal oxide nanofilms using graphene oxide as a template, S. Takenaka, S. Miyake, S. Iwai, H. Matsune and M. Kishida, J. Phys. Chem. C, 119., 12445-12454 (2015).
1) Reductive reaction of selenate with hydrazine over TiO2-supported Pt catalyst in aqueous solution, J. Zhao, H. Matsune, S. Takenaka and M. Kishida, Chem. Lett., 44., 1563-1565 (2015).
2014
Functinalzation of carbon naCatalytic activity of highly durable Pt/CNT catalysts covered with hydrophobic silica layers for the oxygen reduction reaction in PEFCs, S. Takenaka, H. Miyamoto, Y. Utsunomiya, H. Matsune and M. Kishida, J. Phys. Chem. C, 118, 774-783 (2014).
Competitive hydrodesulfurization of dibenzothiophene and hydrodenitrogenation of quinoline over unsupported MoS2 catalyst, H. Farag, M. Kishida and H. Al-Megren, Appl. Catal. A: Gen., 469., 173-182 (2014).
Synthesis of silica-coated AgCl nanoparticles in aqueous poly(vinylpyrrolidone) solution, K. Masuda, H. Matsune, S. Takenaka and M. Kishida, Bull. Chem. Soc. Jpn., 45., 573-575 (2014).
2013
Functinalzation of carbon nanotube-supported precious metal catalysts by coverage with metal oxide layers, Sakae Takenaka and Masahiro Kishida, Catal. Survey from Asia, 17, 71-84 (2013).
Carbon nanofiber supports for preparation of Pt-based metal nanoparticles with high tolerance to sintering, S. Takenaka, A. Iga, K. Park, E. Tanabe, H. Matsune and M. Kishida, Appl. Catal. A: Gen., 45., 211-221 (2013).
2012
Coverage of carbon nanotubes with titania nanoparticles for the preparation of active titania-based photocatalysts, Sakae Takenaka, Takafumi Arike, Hideki Matsune and Masahiro Kishida, Appl. Catal. B:Environ., 125, 358-366 (2012).
Preparation of TiO2-Carbon Nanotube Composite Catalysts for Improvement of the Photocatalytic Activity of TiO2, S. Takenaka, T. Arike, T. Miyazaki, H. Matsune and M. Kishida, Chem. Lett., 41, 617-619 (2012).
Preparation of carbon-supported Pt catalysts covered with microporous silica layers using organosilanes: Sintering resistance and superior catalytic performance for cyclohexane dehydrogenation, K. Nakagawa, T. Okayama, Y. Tanimoto, K. Sotowa, S. Sugiyama, T. Moriga, S. Takenaka and M. Kishida, Appl. Catal. A: Gen., 419-420, 13-21 (2012).
2011
Highly durable Pt cathode catalysts for polymer electrolyte fuel cells; coverage of carbon black-supported Pt catalysts with silica layers, S. Takenaka, H. Matsumori, H. Matsune and M. Kishida, Appl. Catal A: Gen., 409-410, 248-256 (2011).
Improvement in catalytic performance of carbon nanotube-supported metal nanoparticles by coverage with silica layers, S. Takenaka and M. Kishida, J. Jpn. Petrol. Inst., 54 (2), 80-89 (2011).
Highly durable carbon nanotube-supported Pd cathode catalysts covered with silica layers for polymer electrolyte fuel cells: Effect of silica layer thickness on the catalytic performance, S. Takenaka, H. Miyamoto, N. Susuki, H. Matsune and M. Kishida, ECS Trans., 41, 2305-2312 (2011).
Catalytic performance of Pt metal particles at the tips of carbon nanotubes, S. Takenaka, T. Iguchi, E. Tanabe, H. Matsune and M. Kishida, Catal. Lett., 141, 821-825 (2011).
Highly durable carbon nanotube-supported Pd catalysts covered with silica layers for the oxygen reduction reaction, S. Takenaka, N. Susuki, H. Miyamoto, E. Tanabe, H. Matsune and M. Kishida, J. Catal., 279, 381-388 (2011).
2010
Preparation of carbon nanotube-supported Pt catalysts covered with silica layers; application to cathode catalysts for PEFC, H. Matsumori, S. Takenaka, H. Matsune and M. Kishida, Appl. Catal. A: Gen., 373, 176-185 (2010).
Catalytic synthesis of neutral hydrogen peroxide at a CoN2Cx cathode of PEMFC, I. Yamanaka, T. Murayama, and S. Takenaka, ChemSusChem, 3, 59-62 (2010).
Sintering resistance and catalytic activity of Platinum nanoparticles covered with a microporous silica layer using methyltriethoxysilane, K. Nakagawa, Y. Tanimoto, T. Okayama, K. Sotowa, S. Sugiyama, S. Takenaka and M. Kishida, Catal. Lett., 136, 71-76 (2010).
Improvement in the durability of carbon nanotube-supported ruthenium catalysts by coverage with silica layers, T. Arike, S. Takenaka, H. Matsune and M. Kishida, Bull. Chem Soc. Jpn. 83 (8), 953-959 (2010).
Preparation of carbon-supported Pt-Co alloy nanoparticles for oxygen reduction reaction: Promotion of Pt-Co alloy formation by coverage with silica, S. Takenaka, A. Hirata, H. Matsune and M. Kishida, Chem. Lett., 39, 458-459 (2010).
Chemical synthesis of silver nanowires using N,N-dimethyldodecylamine oxide, H. Matsune, Y. Kuramitsu, S. Takenaka and M. Kishida, Chem. Lett., 39, 717-719 (2010).
Preparation of supported Pt-Co alloy nanoparticle catalysts for the oxygen reduction reaction by coverage with silica, S. Takenaka, A. Hirata, E. Tanabe, H. Matsune and M. Kishida, J. Catal., 274, 228-238 (2010).
Highly durable Pd metal catalysts for the oxygen reduction reaction in fuel cells; Coverage of Pd metal with silica, S. Takenaka, N. Susuki, H. Miyamoto, E. Tanabe, H. Matsune and M. Kishida, Chem. Commun., 46, 8950-8952 (2010).
Preparation of silica-coated Pt-Ni alloy nanoparticles using microemulsion and formation of carbon nanofibers by ethylene decomposition, K. Nakagawa, S. Takenaka, H. Matsune and M. Kishida, Stud. Surf. Sci. Catal., 175, 793-796 (2010).
シリカでの被覆を応用したPEFC用カソード触媒の耐久性向上，竹中 壮，岸田昌浩，燃料電池，10 (1), 124-129 (2010).
2009
Excellent Durability of Carbon-Supported Pt Cathode Catalysts Covered with Silica Layers, H. Matsumori, S. Takenaka, H. Matsune and M. Kishida, ECS Trans., 25, 689-696 (2009).
Synthesis of hollow nanospheres consisting of amphiphilic block copolymers, H. Matsune, D. Sakurai, S. Takenaka and M. Kishida, Chem. Lett., 38 (7), 746-747 (2009).
Effects of organosilica-derived microporous coverage of carbon-supported Pt catalysts on dehydrogenation of cyclohexane, K. Nakagawa, Y. Tanimoto, K. Sotowa, S. Sugiyama, S. Takenaka and M. Kishida, Chem. Lett., 38 (5), 480-481 (2009).
Preparation of carbon nanotube-supported Pt metal particles covered with silica layers and their application to electrocatalysts for PEMFC, S. Takenaka, H. Matsumori, T. Arike, H. Matsune and M. Kishida, Topics in Catal., 52, 731-738 (2009).
Production of carbon nanotube by ethylene decomposition over silica-coated metal catalysts, T. Iguchi, S. Takenaka, K. Nakagawa, H. Matsune and M. Kishida, Topics in Catal., 52, 563-570 (2009).
Formation of carbon nanotubes through ethylene decomposition over supported Pt catalysts and silica-coated Pt catalysts, S. Takenaka, T. Iguchi, E. Tanabe, H. Matsune, M. Kishida, Carbon, 47, 1251-1257 (2009).
2008
High resistance to carbon deposition of silica-coated Ni catalysts in propane stream reforming, S. Takenaka, Y. Orita, H. Umebayashi, H. Matsune and M. Kishida, Appl. Catal. A: Gen., 351, 189-194 (2008).
Three-dimensional analysis of carbon nanofibers by cross-sectional TEM observations, H. Ogihara, S. Takenaka, I. Yamanaka, E. Tanabe, A. Genseki, J. Koki and K. Otsuka, Chem. Lett., 37 (8), 868 (2008).
Formation of carbon nanotubes through ethylene decomposition over supported Pt catalysts―Effects of silica coating on catalytic performance of Pt―, S. Takenaka, T. Iguchi, E. Tanabe, H. Matsune and M. Kishida, Chem. Lett., 37 (9), 944 (2008).
High durability of carbon nanotube-supported Pt electrocatalysts covered with silica layers for the cathode in a PEMFC, S. Takenaka, H. Matsumori, H. Matsune, E. Tanabe and M. Kishida, J. Electrochem. Soc. 155 (9), B929 (2008).
Preparation of carbon nanotube-supported metal nanoparticles coated with silica layers, S. Takenaka, T. Arike, H. Matsune, E. Tanabe and M. Kishida, J. Catal., 257, 345 (2008).
Relationship between degree of dynamic morphological change and proliferative potential of murine embryonic stem cells, H. Matsune, D. Sakurai, Y. Niidome, S. Takenaka and M. Kishida, J. Biosci. Bioeng., 105, 58-60 (2008).
Synthesis of carbon nanotube-supported Pt nanoparticles covered with silica layers, S. Takenaka,T. Arike, H. Matsune,E. Tanabe and M. Kishida, Carbon, 46, 365-368 (2008).
2007
Fabrication of nanocomposites composed of carbon nanotubes and silica-coated Pt-based alloy nanoparticles, S. Takenaka, Y. Orita, T. Arike, H. Matsune, E. Tanabe and M. Kishida, Chem. Lett., 36 (10), 1250-1251 (2007).
Improvement in the durability of Pt electrocatalysts by coverage with silica layers, S. Takenaka, H. Matsumori, K. Nakagawa, H. Matsune, E. Tanabe and M. Kishida, J. Phys. Chem. C, 111, 15133-15136 (2007).
Structures of silica-supported Co catalysts prepared using microemulsion and their catalytic performance for the formation of carbon nanotubes through the decomposition of methane and ethylene, S. Takenaka, Y. Orita, H. Matsune, E. Tanabe and M. Kishida, J. Phys. Chem. C, 111, 7748-7756 (2007).
Effect of coverage of silica-supported Ni catalysts with silica upon formation of carbon nanofibers with uniform diameter by ethylene decomposition, K. Nakagawa, S. Takenaka,S.Imagawa,H. Matsune and M. Kishida, Chem. Lett., 36 (2), 252-253 (2007).
Production of CO-free hydrogen through the decomposition of LPG and kerosene over Ni-based catalysts, S. Takenaka, K. Kawashima, H. Matsune and M. Kishida, Appl. Catal. A: Gen., 321, 165-174 (2007).
Specific performance of silica-coated Ni catalysts for the partial oxidation of methane to synthesis gas, S. Takenaka, H. Umebayashi, E. Tanabe, H. Matsune and M. Kishida, J. Catal., 245, 392-400 (2007).
2006
One pot synthesis and characterization of laccase-entrapped magnetic nanobead, H. Matsune, H. Jogasaki, M. Date, S. Takenaka and M. Kishida, Chem. Lett., 35(12), 1356-1357 (2006).
Autocatalysis-like behavior of hydrogen sulfide on hydrodesulfurization of polyaromatic thiophenes over a synthesized molybdenum sulfide catalyst, H. Farag, K. Sakanishi, S. Takenaka and M. Kishida, Appl. Catal. A: Gen., 314, 114-122 (2006).
Preparation of silica-coated Pt metal nanoparticles using microemulsion and their catalytic performance, K. Hori, H. Matsune, S, Takenaka and M. Kishida, Sci. Tech Adv. Mater., 7, 678-684 (2006).
Synthesis and structural characterization of hollow hexagonal cylinder Co-SiO2 composites prepared in a micelle solution, S. Imagawa, K. Inoke, K. Kaneko, H. Matsune, K. Nakagawa, S. Takenaka and M. Kishida, Chem. Lett., 35(7), 816-817 (2006).
Specific performance of silica-coated Pt catalyst for the competitive combustion of methane and other higher hydrocarbons, S. Takenaka, K. Hori, H. Matsune and M. Kishida, Stud. Surf. Sci. Catal., 162, 585-592 (2006).
2005
Control of selectivity based on the diffusion rates of the reactants in the oxidation of mixed hydrocarbons with molecular oxygen over silica-coated Pt catalysts, S. Takenaka, K. Hori, H. Matsune and M. Kishida, Chem. Lett. 34 (12), 1594-1595 (2005).
